Knife work
- E.MacKermak
- Amrod Rhandir
- Posts: 512
- Joined: Wed Dec 16, 2009 1:01 am
- Location: Lugoff, SC
- Contact:
Knife work
Finally got finished with re-hilting a knife I have had for years. The original threaded end was damaged so it was reworked as a peened end. Thanks Eric for the instructions on peening knife handles.
- Attachments
-
- 100_1008.JPG (204.45 KiB) Viewed 10584 times
-
- 100_1010.JPG (198.68 KiB) Viewed 10584 times
-
- 100_1015.JPG (213.13 KiB) Viewed 10584 times
Still round the corner there may wait a new road or a secret gate and though I oft have passed them by a day will come at last when I shall take the hidden paths that run west of the moon, east of the sun.
- Peter Remling
- Athel Dunedain
- Posts: 3735
- Joined: Sat Feb 16, 2008 4:20 am
Re: Knife work
Came out really nice and it looks very utilitarian for a rangers tool/weapon.
Re: Knife work
yeah call my opinion biased but I saw the knife before he redid it... it came out awsome
“From the ashes a fire shall be woken, A light from the shadows shall spring; Renewed shall be blade that was broken, The crownless again shall be king.â€
http://www.mackermakkeep.com
http://www.mackermakkeep.com
- Mirimaran
- Thangailhir
- Posts: 2110
- Joined: Tue Jul 01, 2008 5:38 pm
- Location: North Carolina
- Contact:
Re: Knife work
Great job!
"Well, what are you waiting for? I am an old man, and have no time for your falter! Come at me, if you will, for I do not sing songs of dastards!"
Re: Knife work
very pretty
Re: Knife work
That's a nice knife! Very rugged looking. Glad I could be of service.
Ichthean Forge (pronounced Ick thee an). Maker of knives, and primitive camping gear.
Re: Knife work
Looks very rangerish. How did you do it?
I had a go at re-hilting a long knife that didn't work terribly well so I'd like to know how to do it properly. Thanks.
I had a go at re-hilting a long knife that didn't work terribly well so I'd like to know how to do it properly. Thanks.
Life before Death.
Strength before Weakness.
Journey before Destination.
Re: Knife work
Looks great
"Knowledge is a weapon. I intend to be formidably armed." Richard, the Seeker (Sword of Truth)"
- E.MacKermak
- Amrod Rhandir
- Posts: 512
- Joined: Wed Dec 16, 2009 1:01 am
- Location: Lugoff, SC
- Contact:
Re: Knife work
Thanks for all the comments.
The handle was a piece of 3/4 x 2 oak from Lowes. I drilled through it with a drill press, but didn't have everything I needed before I moved to Texas. I got the brass after the move and the handle and brass shaping was done only with hand tools, which accounts for the rough look that I kinda like. The hardest part is peening the end. I clamped it to the workbench and began peening. Of course the blade slides so every few minutes you have to re-clamp it in the original position. Peening steel is a bit of a chore since I didn't want to hit it to hard and risk missing and breaking the handle. It was a definite experience.
The handle was a piece of 3/4 x 2 oak from Lowes. I drilled through it with a drill press, but didn't have everything I needed before I moved to Texas. I got the brass after the move and the handle and brass shaping was done only with hand tools, which accounts for the rough look that I kinda like. The hardest part is peening the end. I clamped it to the workbench and began peening. Of course the blade slides so every few minutes you have to re-clamp it in the original position. Peening steel is a bit of a chore since I didn't want to hit it to hard and risk missing and breaking the handle. It was a definite experience.
Still round the corner there may wait a new road or a secret gate and though I oft have passed them by a day will come at last when I shall take the hidden paths that run west of the moon, east of the sun.